|
|
EC |
TDS |
NaCl |
Temperature |
|
(ÀÚµ¿ÃøÁ¤¹üÀ§)
00.0 to 29.99 ¥ìS/cm
30.0 to 299.9 ¥ìS/cm
300 to 2999 ¥ìS/cm
3.00 to 29.99 mS/cm
30.0 to 200.0 mS/cm
Up to 500.0 mS/cm actual (*) Conductivity
|
(ÀÚµ¿ÃøÁ¤¹üÀ§)
0.00 to 14.99 ppm
15.0 to 149.9 ppm
150 to 1499 ppm
1.50 to 14.99 g/L
15.0 to 100.0 g/L
Up to 400.0 g/L actual (*) TDS
(with 0.80 factor)
|
0.0 to 400.0% |
0.0 to 60.0¡É |
ÃÖ¼ÒÃøÁ¤´ÜÀ§ |
0.01 ¥ìS/cm
(from 0.00 to 29.99 ¥ìS/cm)
0.1 ¥ìS/cm
(from 30.0 to 299.9 ¥ìS/cm)
1 ¥ìS/cm
(from 300 to 2999 ¥ìS/cm)
0.01 mS/cm
(from 3.00 to 29.99 mS/cm)
0.1 mS/cm (over 30.0 mS/cm)
|
0.01 ppm
(from 0.00 to 14.99 ppm)
0.1 ppm
(from 15.0 to 149.9 ppm)
1 ppm
(from 150 to 1499 ppm)
0.01 g/L
(from 1.50 to 14.99 g/L)
0.1 g/L (over 15.0 g/L)
|
0.1% |
0.1¡ÆC |
|
¡¾ 1% of reading
¡¾ (0.05 ¥ìS/cm or 1 digit, whichever greater) |
¡¾ 1% of reading
¡¾ (0.03 ppm or 1 digit, whichever greater) |
¡¾ 1% of reading |
¡¾ 0.4¡ÆC |
Typical EMC Deviation |
¡¾ 1% of reading |
¡¾ 1% of reading |
¡¾ 1% of reading |
¡¾ 0.1 ¡ÆC |
|
1 point with 6 memorized buffers:
84, 1413 ,5000,12880, 80000 or 111800 ¥ìS/cm |
|
1 point
with HI 7037 buffer
(º°µµÆǸÅ)
|
2 points
at 0 and 50¡ÆC
(plus ¡¾ 1¡ÆC adjustment)
|
|
0 to 60¡É(ÀÚµ¿º¸Á¤ ¹× ¼öµ¿º¸Á¤)
|
|
0.00 to 6.00 %/¡ÆC (for EC and TDS only) Default value is 1.90%/¡ÆC
|
|
0.40 to 0.80 (default value is 0.50)
|
|
HI 76310 Platinum 4-ring probe, K=1 nominal and built-in temperature sensor (included)
|
GLP |
Storing of last calibration data |
Serial Interface |
RS232 - downloading of last calibration data |
|
12 VDC adapter (included)
|
Auto Off |
After 5 minutes (can be disabled) |
Casing |
IP 67 |
|
32 to 122¡ÆF (0 to 50¡ÆC); 95% RH non-condensing
|
|
|
|
1.2§¸ |